Omron FH-1 series User Manual page 415

Type
Sensor Control-
ler settings data
*1. Excludes settings for the image container window. Image container window settings are included in the scene.
*2. FH series/FZ5-800/1100/1200 series:
The file will be the same as that specified in the settings menu of the Scene Group Save Destination for an
external storage device.
FZ5-L series/FZ5-600 series:
Scene Group Save destination settings do not matter and it will be at least one Scene Group file in the USBDisk
folder.
Line Maintenance Screen Layout
A description of the Line Maintenance screen layout and settings.
(a)
(h)
(a) Before revision area
The area for selecting setting data to copy. Display line settings data for Multi-line random-trigger
mode.
(b) After revision area
Selection area for settings data to Paste/Clear. The line settings data for the lines set in Multi-line
random-trigger mode will display.
(c) Description area
The area where a description of the settings data is displayed. Clicking on the settings in either the
Before revision area, or the After revision area will display the settings data.
(d) [Apply immediately]
There are some functional limitations when [Apply immediately] is selected. The timing of when
copied, or cleared settings data gets reflected in the sensor controller settings varies.
Refer to 9-8-3 Operating with Functional Limitations
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
Name
Sensor controller's project
template
(A) (b) (c)
Definition
Applicable to templates created in the Configuration Copy
tool.
Refer to Editing a Template on page 9-22.
(B) (d) (C)
on page 9-44
.
9 Saving/Loading Data
(e)
(f)
(g)
9 - 35
9