Menu List - Omron FH-1 series User Manual

Appendices
A-1 Menu List
The menu for the Main Window is described below.
Main
Command
menu
File End
Function Measure
Scene switch
Scene mainte-
nance
Edit flow
Switch layout
Clear measure-
ment
Clear logging
image
Screen capture
Saving last log-
ging image
Data save
Save to file
Load from file
System initial-
ization
System restart
A - 2
Description
Exits the FH/FHV/FZ5 System.
After you exit the system, restart the sys-
tem or turn OFF the power supply.
Executes a test measurement (single or
continuous measurement), or a re-mea-
surement.
This button switches between scene
groups and scenes:
Used to copy, delete, and rename scenes
and scene groups.
Used to edit measurement flows.
Changes the layout number to display.
Clears the measurement data.
Clears the images that are logged in the
Controller.
Captures the screen that is being dis-
played.
Logs the most recent input images that are
being displayed.
Saves settings data to the flash memory in
the FH/FHV/FZ5.
Saves the settings data, logged images,
and logged data to a file. It also copies
files between memory devices.
Loads a settings file.
Restores the Controller to the default set-
tings.
Restarts the Controller.
Reference
---
Refer to 6-1 Executing Test Measure-
ments on page 6-3.
Refer to 6-4-1 Remeasuring Saved
Images [Remeasurement] on page
6-27.
Refer to 7-2 Switching the Scene or
Scene Group on page 7-4.
Refer to 7-3 Editing Scenes [Scene
Maintenance] on page 7-6.
Refer to 7-4 Editing Scene Groups
[Scene Maintenance] on page 7-8.
Refer to 5-5-2 Editing Processing
Units in a Scene on page 5-24.
Refer to 8-3-1 Arranging Window Ele-
ments (Layout Modification) on page
8-14.
Refer to 6-6-2 Clearing Measurement
Results [Measurement Clear] on
page 6-41.
Refer to 6-6-3 Clearing Saved
Images [Logging Image Clear] on
page 6-41.
Refer to 3-5 Capturing Screen
Images on page 3-32.
Refer to 6-3-1 Logging Measurement
Values and Measurement Images
[Data Logging/Image Logging] on
page 6-8.
Refer to 3-6-1 Saving the Setting to
the Controller [Data Save] on page
3-34.
Refer to Saving/Loading Data (P.9-1).
Refer to Saving/Loading Data (P.9-1).
Refer to 3-7 Initializing the Controller
on page 3-39.
Refer to 3-6-3 Restarting the Control-
ler: [System Restart] on page 3-37.
Refer to Saving/Loading Data (P.9-1).
Vision System FH/FHV/FZ5 Series User's Manual (Z365)