Specifications And Approvals; Specifications; Table 2-1. Model T101 Basic Unit Specifications - Teledyne T101 Operation Manual

2. SPECIFICATIONS AND APPROVALS

2.1. SPECIFICATIONS

Table 2-1. Model T101 Basic Unit Specifications

PARAMETER
Ranges
Measurement Units
1
Zero Noise
1
Span Noise
2
Lower Detectable Limit
Zero Drift (24 hours)
Span Drift (24 hours)
Lag Time
1
Rise/Fall Time
Linearity
Precision
Sample Flow Rate
Temperature Coefficient
Voltage C oefficient
Temperature Range
Humidity Range
Dimensions H x W x D
Weight, Analyzer
(Basic C onfiguration)
AC Power
Analog Output Ranges
Analog Output Resolution
Recorder Offset
Environmental
H S: Min 0-50 ppb Full scale; Max 0-10 ppm Full scale
2
SO : Up to 0-20 ppm Full scale
2
(selectable, independent ranges and auto ranging supported)
ppb, ppm, µg/m3, mg/m3 (selectable)
<0.2 ppb (RMS)
<0.5% of reading (RMS) above 50 ppb
0.4 ppb
<0.5 ppb
<0.5% of full scale
20 seconds
<120 seconds to 95%
1% of full scale
0.5% of reading above 50 ppb
3
650 cm /min ±10%
o
< 0.1% per C
< 0.05% per V
o
5-40 C
0 - 95% RH, non-condensing
7" x 17" x 23.5" (178 mm x 432 mm x 597 mm)
41 lbs (18.3 kg)
45 lbs (20.5 kg) w/internal pump
100V-120V, 60 Hz (202W); 220V-240V, 50 Hz (200W)
10 V, 5V, 1V, 0.1V (selectable)
1 part in 4096 of selected full-scale voltage
±10%
Installation category (over-voltage category) II; Pollution degree 2
DESCRIPTION
23