Teledyne T101 Operation Manual page 314

Teledyne API T/E-Series Models 101, 102, and 108 Software Documentation (PN05492D DCN6485)
Setup Variable
8
ALARM_TRIGGER
FACTORY_OPT
1
All instances of "H2S" in T101, M101E are changed to "TRS" in T102, M102E, and "TS" in T108, M108E.
2
T101, M101E.
3
T102, M102E.
4
T108, M108E.
5
Must power-cycle instrument for these options to fully take effect.
6
Triple-gas option.
7
Fast measurement option.
8
Concentration alarm option.
9
T108U, M108EU.
A-20
Numeric Default
Units Value
Cycles 3
BitFlag 0
Value Range
1–100 Number of times
concentration must exceed
limit to trigger alarm.
0–65535 Factory option flags. Add
values to combine flags.
1 = enable dilution factor
2 = zero/span valves
installed
4 = IZS installed (implies
zero/span valves installed)
16 = display units in
concentration field
32 = enable software-
controlled maintenance
mode
128 = enable switch-
controlled maintenance
mode
2048 = enable Internet
option
Description
07266B DCN6485