Teledyne T101 Operation Manual page 306

Teledyne API T/E-Series Models 101, 102, and 108 Software Documentation (PN05492D DCN6485)
Setup Variable
CONC_PRECISION
CLOCK_ADJ
SERVICE_CLEAR
TIME_SINCE_SVC
SVC_INTERVAL
LANGUAGE_SELECT
LATCH_WARNINGS
DAYLIGHTSAVING_ENABLE
MAINT_TIMEOUT
MEASURE_PERIOD
MEASURE_DELAY
7
FLUSH_DURATION
CONV_TIME
DWELL_TIME
FILT_SIZE
FILT_ASIZE
A-12
Numeric
Units
—
Sec./Day
—
Hours
Hours
Medium Access Level Setup Variables (929 password)
—
—
—
Hours
Minutes
Minutes
Seconds
—
Seconds
Samples
Samples
Default Value Range
Value
1 AUTO,
0,
1,
2,
3,
4
0 -60–60
OFF OFF
ON
0 0–500000
0 0–100000
ENGL ENGL,
SECD,
EXTN
ON ON, OFF
ON ON, OFF
2 0.1–100
10 1–60
3 0.1–20
10 0.1–100
33 MS 33 MS,
66 MS,
133 MS,
266 MS,
533 MS,
1 SEC,
2 SEC
1 0.1–10
240 1–480
20 1–100
Description
Number of digits to display
to the right of the decimal
point for concentrations on
the display. Enclose value in
double quotes (") when
setting from the RS-232
interface.
Time-of-day clock speed
adjustment.
ON resets the service
interval timer.
Time since last service.
Sets the interval between
service reminders.
Selects the language to use
for the user interface.
Enclose value in double
quotes (") when setting from
the RS-232 interface.
ON enables latching warning
messages; OFF disables
latching
ON enables Daylight Saving
Time (DST) change; OFF
disables DST.
Time until automatically
switching out of software-
controlled maintenance
mode.
Length of time to measure
each gas.
How long to defer sampling
after switching streams.
Length of time to flush prior
to measuring each gas.
Conversion time for PMT and
UV detector channels.
Enclose value in double
quotes (") when setting from
the RS-232 interface.
Dwell time before taking
each sample.
Moving average filter size.
Moving average filter size in
adaptive mode.
07266B DCN6485