Approvals And Certifications; Safety; Emc; Other Type Certifications - Teledyne T101 Operation Manual

Specifications and Approvals
PARAMETER
Standard I/O
Optional I/O
For indoor use at altitudes ≤ 2000m only

2.2. APPROVALS AND CERTIFICATIONS

2.2.1. SAFETY

2.2.2.

EMC

2.2.3. OTHER TYPE CERTIFICATIONS

24
1 Ethernet: 10/100Base-T
2 RS-232 (300 – 115,200 baud)
2 USB device ports
8 opto-isolated digital status outputs
6 opto-isolated digital control inputs
4 analog outputs
1 USB com port
1 RS485
8 analog inputs (0-10V, 12-bit)
4 digital alarm outputs
Multidrop RS232
3 4-20mA current outputs
The Teledyne ML Model T101 analyzer was tested and certified for Safety and
Electromagnetic Compatibility (EMC). This section presents the compliance statements
for those requirements and directives.
IEC 61010-1:2001, Safety requirements for electrical equipment for
measurement, control, and laboratory use.
CE: 2006/95/EC, Low-Voltage Directive
North American:
cNEMKO (Canada): CAN/CSA-C22.2 No. 61010-1-04
NEMKO-CCL (US): UL No. 61010-1 (2nd Edition)
EN 61326-1 (IEC 61326-1), Class A Emissions/Industrial Immunity
EN 55011 (CISPR 11), Group 1, Class A Emissions
FCC 47 CFR Part 15B, Class A Emissions
CE: 2004/108/EC, Electromagnetic Compatibility Directive
For additional certifications, please contact Technical Support:
Toll-free Phone:
Phone:
Fax:
Email:
Teledyne ML – T101 Operation Manual
DESCRIPTION
800-846-6062
303-792-3300
303-799-4853
Tml_support@teledyne.com