Teledyne T101 Operation Manual page 309

Teledyne API T/E-Series Models 101, 102, and 108 Software Documentation (PN05492D DCN6485)
Setup Variable
PHYS_RANGE1
PHYS_RANGE2
CONC_RANGE1
CONC_RANGE2
6
CONC_RANGE3
4
OXY_FLOW_SET
4
OXY_FLOW_SLOPE
SAMP_FLOW_SET
SAMP_FLOW_SLOPE
SFLOW_FILT_SIZE
SAMP_PRESS_SET
2
CONV_TYPE
2
CONV_SET
BOX_SET
PMT_SET
07266B DCN6485
Numeric Default
Units Value
PPM 2
PPM 20
Conc 500
Conc 500
Conc 500
cc/m 150
Warnings:
50–300
— 1
cc/m 700
Warnings:
350–1200
— 1
Samples 50
"Hg 29.92
Warnings:
15–35
— MOLY
ºC 315
Warnings:
310–320
ºC 30
Warnings:
8–50
ºC 7,
9
15
Warnings:
2–12,
9
2–20
Value Range
0.1–2500 Low pre-amp range.
0.1–2500 High pre-amp range.
0.1–50000 D/A concentration range 1.
0.1–50000 D/A concentration range 2.
0.1–50000 D/A concentration range 3.
0–500 Nominal oxygenator flow set
point and warning limits.
0.5–1.5 Slope term to correct
oxygenator flow rate.
0–1200 Sample flow set point for
flow calculation and warning
limits.
0.5–1.5 Sample flow slope correction
factor (adjusted flow =
measured flow x slope).
1–200 Sample flow adaptive
moving average filter size.
0–100 Sample pressure set point
for pressure compensation
and warning limits.
NONE, MOLY Converter type.
0–350 Converter temperature set
point and warning limits.
5–60 Box temperature warning
limits. Set point is not used.
0–40 PMT temperature set point
and warning limits.
Description
A-15