Analog Output Signal Type And Range Span Selection - Teledyne T101 Operation Manual

Teledyne ML – T101 Operation Manual

4.6.3.1. Analog Output Signal Type and Range Span Selection

DIAG
PREV
DIAG AIO
< SET
DIAG AIO
< SET SET>
DIAG AIO
DIAG AIO OUTPUT RANGE:
Toggle to set the
signal level and
0.1V
type of the
selected channel
DIAG AIO OUTPUT RANGE:
0.1V
To select an output signal type (DC Voltage or current) and level for one output channel,
activate the ANALOG I/O CONFIGURATION MENU (see Section 4.6.3) then press:
FROM ANALOG I/O CONFIGURATION MENU
ANALOG I / O CONFIGURATION
NEXT
AOUTS CALIBRATED: NO
SET> CAL
CONC_OUT_2:5V, CAL
EDIT
CONC_OUT_2 RANGE: 5V
SET> EDIT
5V
1V 5V 10V CURR
10V
1V 5V 10V CURR
ENTR EXIT
EXIT
EXIT
EXIT
ENTR EXIT
ENTR EXIT
Operating Instructions
Press SET> to select the
analog output channel to be
configured. Press EDIT to
continue
Pressing ENTR records the new setting
and returns to the previous menu.
Pressing EXIT ignores the new setting and
returns to the previous menu.
87