Number Of Records - Teledyne T101 Operation Manual

Teledyne ML – T101 Operation Manual
Use PREV and NEXT to
scroll to the data channel
to be edited.
Set the number of days
between reports (0-366).
Press to set length of time
between reports in the format :
HH:MM (max: 23:59).

4.8.2.6. Number of Records

To define the REPORT PERIOD, follow the instruction shown in Section 4.11.2.2 then
press:
From the DATA ACQUISITION menu
Edit Data Channel Menu
SETUP X.X 0) CONC:
PREV NEXT
SETUP X.X NAME:CONC
<SET SET> EDIT
Press SET> until you reach REPORT PERIOD ...
SETUP X.X REPORT PERIOD:000:00:05
<SET SET> EDIT
SETUP X.X REPORT PERIODD:DAYS:0
0 0 0
SETUP X.X REPORT PERIODD:TIME:01:01
0 0
If at any time an illegal entry is selected (e.g., days > 366) the
ENTR button will disappear from the display.
The number of data records in the DAS is cumulative across all channels and parameters,
filling about one megabyte of space on the disk-on-module; this means that the actual
number of records is limited by the total number of parameters and channels and other
settings in the DAS configuration. Every additional data channel (up to 20), parameter (up
to 50 per channel), number of samples setting etc. will govern the maximum amount of
data points.
The DAS will check the amount of available data space and prevent the user from
specifying too many records at any given point. If, for example, the DAS memory space
can accommodate 375 more data records, the ENTR button will disappear when trying to
specify more than that number of records. This check for memory space may also make
an upload of a DAS configuration with APICOM or a Terminal program fail, if the
ATIMER, 2, 4032, R
INS DEL EDIT PRNT EXIT
PRINT EXIT
PRINT EXIT
ENTR EXIT
0 5 ENTR EXIT
Operating Instructions
Exits to the main
Data Acquisition
menu.
ENTR accepts the new string and
returns to the previous menu.
EXIT ignores the new string and
returns to the previous menu.
137