Holdoff Feature - Teledyne T101 Operation Manual

Teledyne ML – T101 Operation Manual

4.8.2.11. HOLDOFF Feature

Toggle to turn HOLDOFF
ON or OFF
The DAS HOLDOFF feature allows to prevent data collection during calibrations and
during the DAS_HOLDOFF period enabled and specified in the VARS (Section 4.8). To
enable or disable the HOLDOFF, follow the instruction shown in Section 4.11.2.2 then
press:
From the DATA ACQUISITION menu
Edit Data Channel Menu
SETUP X.X 0) CONC:
PREV NEXT INS
SETUP X.X NAME:CONC
<SET SET> EDIT
Press SET> until...
SETUP X.X CAL HOLD OFF:ON
SET> EDIT
SETUP X.X CAL HOLD OFF:ON
ON
ATIMER, 2, 4032, R
DEL EDIT PRNT EXIT
PRINT EXIT
PRINT EXIT
ENTR EXIT
Operating Instructions
Exits to the main
Data Acquisition
menu
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
141