Teledyne T101 Operation Manual page 26

Introduction
Option
Option
Number
N/A
N/A
22
analyzer in maintenance mode where it can continue sampling, yet ignore
calibration, diagnostic, and reset instrument commands. This feature is of
particular use for instruments connected to Multidrop or Hessen protocol
networks.
C all Technical Support for activation.
Second Language Switch activates an alternate set of display messages in
a language other than the instrument's default language.
C all Technical Support for a specially programmed Disk on Module containing the
second language.
Dilution Ratio Option allows the user to compensate for diluted sample gas,
such as in continuous emission monitoring (CEM) where the quality of gas in a
smoke stack is being tested and the sampling method used to remove the gas
from the stack dilutes the gas.
Teledyne ML – T101 Operation Manual
Description/Notes
C all Technical Support for activation.