Remote Das Configuration; Figure 4-12. Apicom User Interface For Configuring The Das - Teledyne T101 Operation Manual

Operating Instructions

4.8.3. REMOTE DAS CONFIGURATION

CAUTION
All data, parameters and channels will be replaced when uploading a DAS configuration
script to the analyzer through its communication ports. Back up data and the original
DAS configuration before attempting any DAS changes.
142
Editing channels, parameters and triggering events as described in this section is can be
performed via the APICOM remote control program using the graphic interface shown in
Figure 4-15. Refer to the next Section 4.12 for details on remote access to the T101
analyzer.

Figure 4-12. APICOM User Interface for Configuring the DAS

Once an DAS configuration is edited (which can be done offline and without interrupting
DAS data collection), it is conveniently uploaded to the instrument and can be stored on a
computer for later review, alteration or documentation and archival. Refer to the
APICOM manual for details on these procedures. The APICOM user manual is included
in the APICOM installation file, which can be downloaded at http://www.teledyne-
ml.com/software/apicom/.
Avoid losing data and saved configurations.
–
Teledyne ML – T101 Operation Manual