Report Function; Compact Report; Starting Date - Teledyne T101 Operation Manual

Teledyne ML – T101 Operation Manual
4.8.2.7. RS-232 Report Function
Toggle to turn
reporting ON or OFF

4.8.2.8. Compact Report

4.8.2.9. Starting Date

The T101 DAS can automatically report data to the communications ports, where they
can be captured with a terminal emulation program or simply viewed by the user.
To enable automatic COM port reporting, follow the instruction shown in Section
4.11.2.2 then press:
From the DATA ACQUISITION menu
Edit Data Channel Menu
SETUP X.X 0) CONC:
PREV NEXT
SETUP X.X NAME:CONC
<SET SET> EDIT
Press SET> key until...
SETUP X.X RS-232 REPORT: OFF
<SET SET> EDIT
SETUP X.X RS-232 REPORT: OFF
OFF
When enabled, this option avoids unnecessary line breaks on all RS-232 reports. Instead
of reporting each parameter in one channel on a separate line, up to five parameters are
reported in one line, instead.
This option allows specifying a starting date for any given channel in case the user wants
to start data acquisition only after a certain time and date. If the Starting Date is in the
past, the DAS ignores this setting.
ATIMER, 2, 4032, R
INS DEL EDIT PRNT EXIT
PRINT EXIT
PRINT EXIT
ENTR EXIT
Operating Instructions
Exits to the main
Data Acquisition
menu
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
139