Teledyne T101 Operation Manual page 9

WARRANTY
WARRANTY POLICY (02024 F)
COVERAGE
NON-TML MANUFACTURED EQUIPMENT
Product Return
Failure to comply with proper anti-Electro-Static Discharge (ESD) handling and packing
instructions and Return Merchandise Authorization (RMA) procedures when returning
parts for repair or calibration may void your warranty. For anti-ESD handling and
packing instructions please refer to "Packing Components for Return to Teledyne ML" in
the Primer on Electro-Static Discharge section of this manual, and for RMA procedures
please refer to our Website at
Return Authorization.
Teledyne Monitor Labs (TML), a business unit of Teledyne Instruments, Inc.,
provides that:
Prior to shipment, TML equipment is thoroughly inspected and tested. Should
equipment failure occur, TML assures its customers that prompt service and support
will be available.
After the warranty period and throughout the equipment lifetime, TML stands ready
to provide on-site or in-plant service at reasonable rates similar to those of other
manufacturers in the industry.
troubleshooting are to be performed by the customer.
Equipment provided but not manufactured by TML is warranted and will be repaired
to the extent and according to the current terms and conditions of the respective
equipment manufacturer's warranty.
All units or components returned to Teledyne ML should be properly packed for
handling and returned freight prepaid to the nearest designated Service Center.
After the repair, the equipment will be returned, freight prepaid.
The complete Terms and Conditions of Sale can be reviewed at
http://www.teledyne-ml.com/terms_and_conditions.asp
CAUTION – Avoid Warranty Invalidation
All maintenance and the first level of field
http://www.teledyne-ml.com under Customer Support >
v