Ain Calibration - Teledyne T101 Operation Manual

Teledyne ML – T101 Operation Manual

4.6.3.6. AIN Calibration

Instrument
calibrates
automatically
This is the sub-menu to conduct the analog input calibration. This calibration should only
be necessary after major repair such as a replacement of CPU, motherboard or power
supplies. Activate the ANALOG I/O CONFIGURATION MENU (see Section 4.6.3),
then press:
STARTING FROM ANALOG I / O CONFIGURATION MENU
DIAG ANALOG I / O CONFIGURATION
PREV NEXT
Continue pressing SET> until ...
DIAG AIO AIN CALIBRATED:
< SET SET> CAL
DIAG AIO CALIBRATING A/D ZERO
CALIBRATING A/D SPAN
DIAG AIO AIN CALIBRATED:
< SET SET> CAL
ENTR EXIT
NO
EXIT
YES
EXIT
Operating Instructions
Exit at any time to
return to the main
DIAG menu
Exit to return to the
ANALOG I/O
CONFIGURATION
MENU
95