Specifications, Approvals And Warranty; Specifications; Table 2-1: Model 100E Basic Unit Specifications - Teledyne 100E Instruction Manual

Model 100E Instruction Manual
2. SPECIFICATIONS, APPROVALS AND
WARRANTY

2.1. Specifications

Min/Max Range
(Physical Analog Output)
Measurement Units
1
Zero Noise
1
Span Noise
Lower Detectable Limit
Zero Drift (24 hours)
Zero Drift (7 days)
Span Drift (7 Days)
Linearity
Precision
Temperature Coefficient
Voltage Coefficient
1
Lag Time
1
Rise/Fall Time
Sample Flow Rate
Temperature Range
Humidity Range
Dimensions H x W x D
Weight, Analyzer
(Basic Configuration)
AC Power Rating
Environmental
Analog Outputs
Analog Output Ranges
Analog Output Resolution
Status Outputs
Control Inputs
Serial I/O
Certifications
1 As defined by the USEPA.
2 Defined as twice the zero noise level by the USEPA.
045150102 Rev XB1
Table 2-1: Model 100E Basic Unit Specifications
In 1ppb increments from 50ppb to 20 000ppb, dual ranges or auto
ranging
ppb, ppm, µg/m3, mg/m3 (user selectable)
0.2 ppb RMS
0.2 ppb RMS
2
0.4 ppb RMS
<0.5 ppb
1 ppb
<0.5% FS
1% of full scale
0.5% of reading1
< 0.1% per
< 0.05% per V
20 sec
95% in <100 sec
650cc/min. ±10%
5-40oC
0 - 95% RH, non-condensing
7" x 17" x 23.5" (178 mm x 432 mm x 597 mm)
45 lbs (20.5 kg) w/internal pump
100 V, 50/60 Hz (3.25A);
115 V, 60 Hz (3.0 A);
220 – 240 V, 50/60 Hz (2.5 A)
Installation category (over-voltage category) II; Pollution degree 2
Three (3) Outputs
100 mV, 1 V, 5 V, 10 V, 2-20 or 4-20 mA isolated current loop.
All Ranges with 5% Under/Over Range
1 part in 4096 of selected full-scale voltage
8 Status outputs from opto-isolators
6 Control Inputs, 3 defined, 3 spare
One (1) RS-232; One (1) RS-485 (2 connecters in parallel)
Baud Rate : 300 – 115200: Optional Ethernet Interface
USEPA: Reference Method Number EQOA-XXXX-XXX
CE: XXNNNNN-N:NN + XN:NN + XN:NN, XXNNNNN - Class A

Specifications, Approvals and Warranty

o
C
19