Operating Instructions
4.6.3.7. Analog Inputs (XIN1...XIN8) Option Configuration
DIAG
PREV
DIAG AIO
DIAG AIO
DIAG AIO
XIN1 OFFSET:0.00V
< SET
SET>
EDIT
DIAG AIO
XIN1 UNITS:V
< SET
SET>
EDIT
DIAG AIO
XIN1 DISPLAY:OFF
< SET
EDIT
Figure 4-6. DIAG – Analog Inputs (Option) Configuration Menu
96
To configure the analyzer's optional analog inputs define for each channel:
•
gain (number of units represented by 1 volt)
•
offset (volts)
•
engineering units to be represented in volts (each press of the touchscreen button
scrolls the list of alphanumeric characters from A-Z and 0-9)
•
whether to display the channel in the Test functions
To adjust settings for the Analog Inputs option parameters press:
ANALOG I / O CONFIGURATION
NEXT
ENTR
AOUTS CALIBRATED: NO
< SET SET>
CAL
XIN1:1.00,0.00,V,OFF
< SET SET>
EDIT
DIAG AIO
SET>
EXIT
EXIT
EXIT
Teledyne ML – T101 Operation Manual
EXIT
Press SET> to scroll to the first
EXIT
channel. Continue pressing SET>
to view each of 8 channels.
EXIT
XIN1 GAIN:1.00V/V
EDIT
EXIT
DIAG AIO
+
0
0
Press to change
Gain value
Press EDIT at any channel
to to change Gain, Offset,
Units and whether to display
the channel in the Test
functions (OFF/ON).
XIN1 GAIN:1.00V/V
1
.0
0
ENTR EXIT
Pressing ENTR records the new setting
and returns to the previous menu.
Pressing EXIT ignores the new setting and
returns to the previous menu.