Set Intermodule Port Redundancy Command; Set Intermodule Port Redundancy Off Command - Avaya P333R-LB User Manual

Set intermodule port redundancy Command

Use the set intermodule port redundancy command to define or delete the
stack's unique intermodule redundancy scheme. The defined scheme can be
enabled or disabled using the reversed set port spantree enable/disable
command.
The syntax for this command is:
set intermodule port redundancy <module/prim-port> <module/
second-port> {on [<name>]}
<module/prim-port>
<module/second-port>
{on}
[<name>]
Example:
P330-N> set intermodule port redundancy 1/7 2/12 on backbone
backbone: port 2/12 is intermodule redundant to port 1/7
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".

Set intermodule port redundancy off Command

Use the set intermodule port redundancy off command to clear the
intermodule redundancy.
The syntax for this command is:
set intermodule port redundancy off
Avaya P333R-LB User's Guide
Chapter 5
the primary port number
the secondary port number
set the intermodule redundancy
the name of the fast redundancy (default is 'fast')
Cajun Campus CLI – Layer 2
119