2. Refer to the vendor documentation for server configuration.
Pinging the RADIUS server
About this task
Ping the RADIUS server to ensure connection exists.
Procedure
1. Use the ping <server IP> command to ensure connection.
2. Observe no packet loss to confirm connection.
Enable EAP on the PC
The PC must have an EAP-enabled device that is correctly configured.
Task flow: Enable EAP on the PC
The following task flow assists you to ensure the PC network card has EAP enabled.
Figure 25: Enable EAP on the PC
Troubleshooting
EAP client authentication
December 2013
65