Show Cascading Fault-Monitoring Command; Show Trunk Command - Avaya P333T User Manual

Chapter 6 Cajun Campus CLI – Layer 2

Show cascading fault-monitoring Command

Use the show cascading fault-monitoring command to display the status of
the fault trap sending mode for cascading links.
The syntax for this command is:
show cascading fault-monitoring [<mod_num>]
Example:
Cajun_P330-N> show cascading fault-monitoring 1
Module 1 cascading-down fault monitoring enabled.
Module 1 cascading-up fault monitoring enabled.

Show trunk Command

Use the show trunk command to display VLAN tagging information of the
ports, prot binding mode, and the port VLAN ID.
The syntax for this command is:
show trunk [<mod_num>[/<port_num>]]
Example:
Cajun_P330-N> show trunk
Port
------ ----- ----------------------- -----------
1/1
1/2
1/3
1/4
1/5
Cajun_P330-N> show trunk 1/5
Port
------ ----- -------------- ----------- ----------------------
1/5
56
Mode Binding mode
dot1q bound to configured vlans
dot1q bound to all vlans
off statically bound
off statically bound
off statically bound
Mode Binding mode
off statically bound
Native vlan
1
1
1
1
1
Native vlan Vlans allowed on trunk
1 1
Avaya P333T User's Guide