Vlan Commands; Show Trunk Command - Avaya P130 User Manual

VLAN Commands

Show trunk Command

Use the show trunk command to display VLAN tagging information of the ports.
The syntax for this command is:
show trunk [<mod_num>[/<port_num>]]
<mod_num>
<port_num>
Example:
P130-N> show trunk 1/22
show trunk 1/22
Port Mode
------ ----- -------------------- ----------- ----------------------
1/22 off
Following are the show trunk command output fields:
Field
Port
Mode
Native VLAN
VLANs allowed
on trunk
Avaya P130 User's Guide
Module number
Number of the port on the module
Binding mode
statically bound
Description
Module and port number(s)
Tag status of the port (ON - dot1Q tagging mode,
OFF - clear mode).
Number of the Port VLAN ID (the VLAN to which received
untagged traffic will be assigned). If the Port is in "clear
mode" only frames of this VLAN will be transmitted.
Range of values allowed on the Trunk
Chapter 6
Native vlan Vlans allowed on trunk
1 1
Avaya P130 CLI
87