Show Trunk - Avaya P460 Reference Manual

Example:
P460-1> show timezone
Timezone set to 'GMT', offset from UTC is 0 hours

show trunk

User level: read-only, read-write, admin.
Use the show trunk command to display VLAN tagging information for the
switch.
The syntax for this command is:
show trunk [<module>[/<port>-<port]]
module
(Optional)
port
(Optional)
Example:
P460-1> show trunk 4/1
Port
-----
41/1
41/2
Output Fields:
Field
Port
Mode
Binding mode
Native VLAN
Avaya P460 Reference Guide
Number of the module. If you do not specify a number, all
modules are shown.
Number of the port on the module. If you do not specify a
number, all ports on the specificity module are shown.
You can specify a port range.
Mode Binding mode
----- --------------------
off statically bound
dot1q statically bound
Description
Switch and port number(s)
Tag status of the port (dot1q - dot1Q tagging mode,
off - clear mode).
Binding mode of the port
Number of the Port VLAN ID (the VLAN to which received
untagged traffic will be assigned).
Chapter 2 Avaya P460 CLI Commands
Native vlan
-----------
1
2
179