Table of Contents
Advertisement
Chapter 9
User Authentication
Figure 9.1 illustrates the RADIUS authentication procedure:
Figure 9.1
RADIUS CLI Commands
In order to...
Enable or disable authentication for
the P460 switch. RADIUS
authentication is disabled by
default
Set a primary or secondary
RADIUS server IP address
Configure a character string to be
used as a "shared secret" between
the switch and the RADIUS server.
58
RADIUS Authentication Procedure
User attempts login
Local User
account
authenticated in
switch?
No
Authentication
request sent to
RADIUS Server
User name and
password
authenticated?
No
Authentication Reject
sent to switch
User cannot access switch
embedded managegment
Yes
Yes
Perform log-in according
to user's priviliege level
to switch
Use the following command...
set radius authentication
set radius authentication server
set radius authentication secret
Avaya P460 Installation and Maintenance Guide
Advertisement
Table of Contents
