Copy Tftp Sw_Image Command; Radius Commands; Set Radius Authentication Secret Command - Avaya P333T User Manual

Chapter 6 Cajun Campus CLI – Layer 2

Copy tftp SW_image Command

Use the copy tftp SW_image command to update the software image and the
device manager applications of a designated module. This command assumes that
both files have the same file name and location, and that only the file extension
differentiates between them.
The syntax for this command is:
copy tftp SW_image <image-file> EW_archive <filename><ip>
<mod_num>
image-file
filename
ip
mod_num
Example:
Cajun_P330-N# copy tftp SW_image c:\p333t\p333Tweb101
EW_archive c:\p333t\p333Tweb201 192.168.49.10 5
Cajun_P330-N#

Radius Commands

The following radius commands are accessible from Privileged mode.

Set radius authentication secret Command

Use the set radius authentication command to enable secret
authentication for the Avaya P330 unit.
The syntax for this command is:
set radius authentication secret <string>
string
Example:
Cajun_P330-N(super)# set radius authentication secret sodot
Cajun_P330-N(super)#
Cajun_P330-N(super)#
112
Common name for the files that contain the Software
Image and Embedded Web archive (full path)
Embedded Web Manager image file name (full path)
The ip address of the TFTP host
Target module number
text password
Avaya P333T User's Guide