Radius Commands; Show Radius Authentication Command; Set Radius Authentication Command; Set Radius Authentication Secret Command - Avaya P130 User Manual

Radius Commands

Show radius authentication Command

Use the show radius authentication command to display all RADIUS
authentication configurations. The shared secrets will not be displayed.
The syntax for this command is:
show radius authentication
Example:
P130-N(super)# show radius authentication
RADIUS Authentication Parameters:
-------------------------------------------------
Mode:
Primary-server:
Secondary-server:
Retry-number:
Retry-time:
UDP-port:
shared-secret:

Set radius authentication Command

Use the set radius authentication command to enable or disable
authentication for the P130 unit. RADIUS authentication is disabled by default.
The syntax for this command is:
set radius authentication {enable | disable}

Set radius authentication secret Command

Use the set radius authentication command to enable secret authentication
for the P130 unit.
The syntax for this command is:
set radius authentication secret <string>
<string>
Example:
P130-N(super)# set radius authentication secret sodot
Avaya P130 User's Guide
Enabled
149.49.42.252
149.49.48.134
sodot
Text password
Chapter 6 Avaya P130 CLI
4
5
1645
105