Radius Commands; Set Radius Authentication Command; Set Radius Authentication Secret Command - Avaya P333R-LB User Manual

Radius Commands

The following radius commands are accessible from Privileged mode.
• set radius
authentication
• set radius
authentication
secret
• set radius
authentication
server
• clear radius
authentication
server
• set radius
authentication
retry-time
• set radius
authentication
retry-number
• set radius
authentication
udp-port

Set radius authentication Command

Use the set radius authentication command to enable or disable
authentication for the P330 unit. RADIUS authentication is disabled by default.
The syntax for this command is:
set radius authentication [enable|disable]

Set radius authentication secret Command

Use the set radius authentication secret command to enable secret
authentication for the Avaya P330 unit.
The syntax for this command is:
set radius authentication secret <string>
string
Avaya P333R-LB User's Guide
Enable or disable authentication for the
P330 unit
Enable secret authentication for the
Avaya P330 unit
Set a primary or secondary RADIUS
server IP address
Remove a primary or secondary RADIUS
authentication server
Set the time to wait before re-sending an
access request
Set the number of times an access request
is sent when there is no response
Set the RFC 2138 approved UDP port
number
text password
Chapter 5 Cajun Campus CLI – Layer 2
Page 133
Page 133
Page 134
Page 134
Page 134
Page 135
Page 135
133