Omron CS1G/H-CPUxxH Instructions Manual page 480

Conversion Instructions
Flags
Example
3-12-13 LINE TO COLUMN: COLM(064)
Purpose
Ladder Symbol
Variations
Applicable Program Areas
Operands
Name Label
Error Flag ER
Equals Flag =
When CIO 000000 is ON in the following example, LINE(063) copies bit 5
from D00100 to D00115 to the 16 bits in D00200.
&5
Converts the 16 bits of the source word to a column of bits in a 16-word range
of destination words (the same bit number in 16 consecutive words).
COLM(064)
Variations Executed Each Cycle for ON Condition
Executed Once for Upward Differentiation
Executed Once for Downward Differentiation Not supported
Immediate Refreshing Specification
Block program areas
OK OK
D: First Destination Word
Specifies the first destination word. D and D+15 must be in the same data
area.
Operation
ON if N is not within the specified range of 0000 to 000F.
OFF in all other cases.
ON if D is 0000 after execution.
OFF in all other cases.
S:
to
D: D00200
S: Source word
S
D: First destination word
D
N N: Bit number
Step program areas Subroutines
OK
Section 3-12
N: #0005
to
COLM(064)
@COLM(064)
Not supported
Interrupt tasks
OK
459