Omron CS1G/H-CPUxxH Instructions Manual page 908

Network Instructions
Operand Specifications
Description
6. Refer to Automatic Allocation of Communications Ports on page 872 for
details on using automatic allocation of the communications port number
(logical port).
Area
CIO Area
Work Area
Holding Bit Area
Auxiliary Bit Area
Timer Area
Counter Area
DM Area
EM Area without bank
EM Area with bank
Indirect DM/EM
addresses in binary
Indirect DM/EM
addresses in BCD
Constants
Data Registers
Index Registers
Indirect addressing
using Index Registers
RECV(098) requests the number of words specified in C beginning at word S
to be transferred from the designated device to the local PLC. The data is
received through the PLC's CPU Bus or over the network and written to the
PLC's data area beginning at D.
Number of words
to receive
A response is required with RECV(098) because the response contains the
data being received. If the response hasn't been received within the response
monitoring time set in C+4, the request for data transfer will be retransmitted
up to 15 times (retries set in bits 0 to 3 of C+3).
S
CIO 0000 to CIO 6143
W000 to W511
H000 to H511
A000 to A447 A448 to A959
A448 to A959
T0000 to T4095
C0000 to C4095
D00000 to D32767
E00000 to E32767
En_00000 to En_32767
(n = 0 to C)
@ D00000 to @ D32767
@ E00000 to @ E32767
@ En_00000 to @ En_32767
(n = 0 to C)
*D00000 to *D32767
*E00000 to *E32767
*En_00000 to *En_32767
(n = 0 to C)
---
---
---
,IR0 to ,IR15
–2048 to +2047, IR0 to –2048 to +2047, IR15
DR0 to DR15, IR0 to IR15
,IR0+(++) to ,IR15+(++)
,–(– –)IR0 to, –(– –)IR15
Local node
Section 3-25
D C
CIO 0000 to
CIO 6139
W000 to W507
H000 to H507
A000 to A443
A448 to A955
T0000 to T4091
C0000 to C4091
D00000 to
D32763
E00000 to
E32763
En_00000 to
En_32763
(n = 0 to C)
Source node (remote node)
887