Serial Communications Instructions
Example: Sending Data
&10
C: D00200
S:
When CIO 000000 is ON in the following example, 10 bytes of data starting in
D00100 are sent as shown without any conversion.
0
RS and ER signal control
Not used.
0: No RS and ER signal.
Most signifi-
Least signif-
cant bytes
icant bytes
Byte order
1: Least significant bytes first
Sent in speci-
fied order.
5 bytes
Start and end codes added according to set-
ting in PC Setup (this example assumes that
both a start and end code have been set).
ST 12 34 AB CD EF ED
ST: Start code (e.g., 02 hex)
ED: End code (e.g., 03 hex)
Sent
Section 3-24
857