Omron CS1G/H-CPUxxH Instructions Manual page 464

Conversion Instructions
Flags
Examples
R+1
R+14
R+15
R+16
R+17
R+30
R+31
When two bytes are being converted, MLPX(076) will read the bytes in S from
right to left and will wrap around to the rightmost byte if the leftmost byte
(byte 1) has been specified as the starting byte.
The following diagram shows some example values for C and the 8-to-256 bit
conversions that they produce.
C: #1010
Digit 1
Name Label
Error Flag ER
4-to-16 bit Conversion
When CIO 000000 is ON in the following example, MLPX(076) will convert 3
digits in S beginning with digit 1 (the second digit), as indicated by C (#0021).
The corresponding bits in D00100, D00101, and D00102 will be turned ON.
C
l
=1 (Convert 2 bytes.)
n=1 (Start with second byte.)
8-to-256 bit decoding
(Bit m of R to R+15 is turned ON.)
16
Digit 0
Operation
ON if C is not within the specified ranges.
OFF in all other cases.
Section 3-12
C: #1011
Digit 1 Digit 0
443