Omron CS1G/H-CPUxxH Instructions Manual page 193

Sysmac cs series; sysmac cj series

Hide thumbs Also See for CS1G/H-CPUxxH:

Table of Contents

Sequence Output Instructions

the input device) can cause the operand bit of KEEP(011) to be reset. This sit-

uation is shown below.

The operands for KEEP(011) are input in a different order in ladder diagrams

and mnemonic code.

Ladder diagram order: Set input → KEEP(011) → Reset input

Mnemonic code order: Set input → Reset input → KEEP(011)

When CIO 000000 goes ON in the following example, CIO 00500 is turned

ON. CIO 00500 remains ON until CIO 000001 goes ON.

When CIO 000002 goes ON and CIO 000003 goes OFF in the following

example, CIO 00100 is turned ON. CIO 00100 remains ON until CIO 000004

or CIO 000005 goes ON.

Note KEEP(011) is input in different orders on in ladder and mnemonic form. In lad-

der form, input the set input, KEEP(011), and then the reset input. In mne-

monic form, input the set input, the reset input, and then KEEP(011).

Chapters

Table of Contents