Omron CS1G/H-CPUxxH Instructions Manual page 295

Comparison Instructions
000000
BCMP2
0010
D00200
0100
3-7-10 AREA RANGE COMPARE: ZCP(088)
Purpose
Ladder Symbol
Variations
Applicable Program Areas
Operand Specifications
274
D00203 and D00204, D00247 and D00248, and the other words in the com-
parison block, and bit 1 in CIO 0100, bit 7 in CIO 1010, and the other bits in
the result words are manipulated according to the results of comparison.
S: CIO 0010 0 1 7 5
Compares a 16-bit unsigned binary value (CD) with the range defined by
lower limit LL and upper limit UL. The results are output to the Arithmetic
Flags.
This instruction is supported by the CS1-H, CJ1-H, CJ1M, and CS1D CPU
Units only.
Variations
Immediate Refreshing Specification
Block program areas
OK
Area
CIO Area
Work Area
Holding Bit Area
Auxiliary Bit Area
Timer Area
Counter Area
DM Area
EM Area without bank
0 0 1 7
D00201 0 0 0 0
D00203 0 0 8 0
D00205 0 1 6 0
D00231 1 2 0 0
D00233 1 5 0 0
D00235 1 9 0 0
D00237 1 8 0 0
D00247 0 1 0 0
ZCP(088)
CD: Comparison Data
CD
LL: Lower limit of range
LL
UL: Upper limit of range
UL
Executed Each Cycle for ON Condition
Executed Once for Upward Differentiation
Executed Once for Downward Differentiation Not supported
Step program areas
OK
CD
CIO 0000 to CIO 6143
W000 to W511
H000 to H511
A000 to A959
T0000 to T4095
C0000 to C4095
D00000 to D32767
E00000 to E32767
Section 3-7
R: CIO 0100
0 1 0 0 D00202
0 1 8 0 D00204
0 2 6 0 D00206
1 8 0 0 D00232
R: CIO 0101
0 5 0 0 D00234
0 1 0 0 D00236
0 2 0 0 D00238
2 0 0 0 D00248
ZCP(088)
Not supported
Not supported
Subroutines Interrupt tasks
OK OK
LL UL
Bit