Omron CS1G/H-CPUxxH Instructions Manual page 233

Timer and Counter Instructions
Ladder Symbol
Variations
Applicable Program Areas
Operands
Operand Specifications
212
PV
refresh
method
BCD
TIMH(015)
Binary
TIMHX(551)
Variations Executed Each Cycle for ON Condition
Executed Once for Upward Differentiation
Executed Once for Downward Differentiation Not supported.
Immediate Refreshing Specification
Block program areas
Not allowed
N: Timer Number
The timer number must be between 0000 and 4095 (decimal).
S: Set Value
The set value must be between #0000 and 9999 in BCD mode.
Area
CIO Area
Work Area
Holding Bit Area
Auxiliary Bit Area
Timer Area
Counter Area
DM Area
EM Area without bank
EM Area with bank
Indirect DM/EM
addresses in binary
Symbol
N N: Timer number
S S: Set value
N
N: Timer number
S S: Set value
Step program areas
OK OK
N
---
---
---
---
0000 to 4095 (decimal)
---
---
---
---
---
Section 3-6
Operands
N: 0000 to 4095 (decimal)
S: #0000 to #9999 (BCD)
N: 00000 to 4095 (decimal)
S: &0 to &65535 (decimal)
#0000 to #FFFF (hex)
TIMH(015)/
TIMHX(551)
Not supported.
Not supported.
Subroutines Interrupt tasks
Not allowed
S
CIO 0000 to CIO 6143
W000 to W511
H000 to H511
A000 to A959
T0000 to T4095
C0000 to C4095
D00000 to D32767
E00000 to E32767
En_00000 to En_32767
(n = 0 to C)
@ D00000 to @ D32767
@ E00000 to @ E32767
@ En_00000 to
@ En_32767
(n = 0 to C)