Omron CS1G/H-CPUxxH Instructions Manual page 636

Double-precision Floating-point Instructions (CS1-H, CJ1-H, CJ1M, or CS1D Only)
Description
Area
Indirect DM/EM *D00000 to *D32767
addresses in BCD
*E00000 to *E32767
*En_00000 to *En_32767
(n = 0 to C)
Constants ---
Data Registers ---
Index Registers ---
Indirect addressing ,IR0 to ,IR15
using Index Registers
–2048 to +2047 ,IR0 to –2048 to +2047 ,IR15
DR0 to DR15, IR0 to IR15
,IR0+(++) to ,IR15+(++)
,–(– –)IR0 to, –(– –)IR15
The input comparison instruction compares the data specified in S
double-precision floating point values (64-bit IEEE754 data) and creates an
ON execution condition when the comparison condition is true. When the data
is stored in words, S and S
1
bit data. The 64-bit floating-point data cannot be input as constants.
Inputting the Instructions
The input comparison instructions are treated just like the LD, AND, and OR
instructions to control the execution of subsequent instructions.
Input type
LD The instruction can be connected directly to the left bus bar.
AND The instruction cannot be connected directly to the left bus bar.
OR The instruction can be connected directly to the left bus bar.
LD connection
<D
AND connection
OR connection
<D
S
1
specify the first of four words containing the 64-
2
Operation
ON execution condition when
comparison result is true.
ON execution condition when
comparison result is true.
<D
ON execution condition when
comparison result is true.
Section 3-16
S
2
and S as
1 2
615