Idle Speed Adjusting Screw; Shift Lever - KTM F8475S0 2019 Owner's Manual

6.12

Idle speed adjusting screw

6.13

Shift lever

The idle setting of the throttle valve body has a big influence on
the vehicle's starting behavior, on stable idling, and on vehicle
response when the throttle is opened.
An engine with a correctly set idle speed is easier to start than an
engine with the idle speed set incorrectly.
The idle speed is adjusted with idle speed adjusting screw
Increase the idle speed by turning the idle speed adjusting screw
clockwise.
Decrease the idle speed by turning the idle speed adjusting screw
counterclockwise.
F01521-10
1
Shift lever is mounted on the left of the engine.
401950-10
(SX‑F EU)
The gear positions can be seen in the figure.
The neutral or idle position is between the first and second
gears.
401950-14
(SX‑F US, XC‑F US)
The gear positions can be seen in the figure.
The neutral or idle position is between the first and second
gears.
401950-13
CONTROLS 6
1
.
21