30/ENGINE ASSEMBLY
Installing the cylinder head
21.23
–
Cover the engine case opening with a cloth. Thread the timing chain through the
chain shaft. Mount the piston pin.
Info
In order to present them more clearly, the following steps are shown with a
removed piston.
304961-10
–
Position the piston pin retainer.
400994-01
–
Insert the special tool and press it forcefully to the piston.
–
Turn the special tool clockwise, thereby pushing the piston pin retainer into the
groove.
Insert, piston pin lock ring (77229030000) (
–
Ensure that the piston pin retainer is seated properly on both sides.
302807-10
–
Remove the cloth.
–
Keep the timing chain taut. Push the cylinder down carefully and let the dowel pins
engage.
304962-10
–
Position cylinder head gasket
Info
Ensure that the dowels are seated properly.
–
Put the cylinder head in place.
304958-11
p. 277)
.
1
168