Omron R88D-GT series User Manual page 392

6-4 Setting the Mode
Output Signals
Signal
No.
6
Switching between Input Signals and Output Signals
The following procedure can also be used to switch between inputs and outputs.
Press the Increment or Decrement key to select the signal number to be monitored.
6-11
Abbreviation
00 READY Servo Ready
01 /ALM Alarm Output
02 INP Positioning Completion Output
03 BKIR Brake Interlock
04 OUTM1 Zero Speed Detection
05 OUTM2 Torque Limiting
06 --- Speed Conformity
Servomotor Rotation Speed
09 TGON
Detection
If the decimal point is at the right of the signal number,
the signal number can be changed.
Move the flashing decimal point with the Shift key.
If the decimal point is at the right of the input/output
indication, you can switch between inputs and outputs.
Switches between inputs and outputs.
(Lowest input signal number)
(Highest input signal number)
(Lowest output signal number)
(Highest output signal number)
CN1
Name
Pin
No.
35
37
39
11
12
40
12/40
39