Omron R88D-GT series User Manual page 249

 Power Cables (Robot Cables)
Use a robot cable when the power cable must be flexible.
Servomotor type
,
3 000-r/min Servomotors
3,000-r/min
Flat Servomotors
2,000-r/min Servomotors
1,000-r/min Servomotors
Note 1.The @@@ digits in the model number indicate the cable length (3 m, 5 m, 10 m, 15 m, 20 m, 30 m, 40 m,
or 50 m). Example model number for a 3-m cable: R88A-CAGA003SR
Note 2. For 50 to 750 W (3,000-r/min) Servomotors and Flat Servomotors, there are separate connectors for
power and brakes. Therefore, when a Servomotor with a brake is used, it will require both a Power Cable
for a Servomotor without a brake and a Brake Cable.
 Computer Monitor Cable
A Computer Monitor Cable and the Computer Monitor Software for Servo Drives
(CX-Drive) are required to set Servo Drive parameters and perform monitoring with a personal
computer.
Name/specifications
Computer Monitor Cable
Power Cables for Servomo-
tors without Brakes
50 to 750 W R88A-CAGA@@@SR
1 to 1.5 kW R88A-CAGB@@@SR
2 kW R88A-CAGC@@@SR
3 to 5 kW R88A-CAGD@@@SR
100 to 400 W R88A-CAGA@@@SR
1 to 1.5 kW R88A-CAGB@@@SR
2 kW R88A-CAGC@@@SR
3 to 5 kW R88A-CAGD@@@SR
900 W R88A-CAGB@@@SR
2 to 4.5 kW R88A-CAGD@@@SR
2 m R88A-CCG002P2
Power Cables for Servomotors
with Brakes
R88A-CAGA@@@SR
(For Power Connector)
R88A-CAGA@@@BR
(For Brake Connector)
R88A-CAGB@@@BR
R88A-CAGC@@@BR
R88A-CAGD@@@BR
R88A-CAGA@@@SR
(For Power Connector)
R88A-CAGA@@@BR
(For Brake Connector)
R88A-CAGB@@@BR
R88A-CAGC@@@BR
R88A-CAGD@@@BR
R88A-CAGB@@@BR
R88A-CAGD@@@BR
Model
Only a 2-meter cable is avail-
able.
4-2 Wiring
Remarks
4-14
4