Show Lldp; Show Lldp Ports - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual

show lldp

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show LLDP settings:
DGS3100# show lldp
LLDP System
Chassis ID Subtype
Chassis ID
System Name
System Description
Ma
System Capabilities
LLDP C
LLDP Status
LLDP Forward Status
Message Tx In
Message Tx Hold
Tx Delay
Reinit Dela
Notification I
DGS3100#

show lldp ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the information for port 2:9:
191
To display the Link Layer Discovery Protocol (LLDP) on the switch.
show lldp configuration port <portlist>
The show lldp configuration displays the LLDP configuration on
the switch.
<portlist> - Specifies a port or range of ports for which the lldp status
is to be displayed..
None.
Information
: 00:0
naged Switch
onfigurations
: Enabled
terval
Multiplier : 2
: 1
y : 1
nterval
To display the Link Layer Discovery Protocol (LLDP) ports
configuration on the switch.
show lldp ports <portlist>
The show lldp ports command displays the information regarding
the ports.
<portlist> − A port or range of ports to be displayed.
Only Administrator or operator-level users can issue this command.
: MAC Address
0:22:aa:bb:33
: DGS-3100
: DGS-3100-48P Gigabit stac
: Bridge
: Disabled
: 5
: 5
kable PoE L2