24
IP Addressing Commands
24.8 ip arp proxy disable
Use the ip arp proxy disable Global Configuration mode command to globally
disable proxy Address Resolution Protocol (ARP). Use the no form of this
command reenable proxy ARP.
Syntax
ip arp proxy disable
no ip arp proxy disable
Parameters
N/A
Default
Enabled by default.
Command Mode
Global Configuration mode
User Guidelines
This command overrides any proxy ARP interface configuration.
The command is supported only when IP Routing is enabled.
Example
The following example globally disables ARP proxy.
switchxxxxxx(config)#
ip arp proxy disable
24.9 ip proxy-arp
Use the ip proxy-arp Interface Configuration mode command to enable an ARP
proxy on specific interfaces. Use the no form of this command disable it.
Syntax
ip proxy-arp
511
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide