Output Format; Making Copies Into A Booklet - Xerox WorkCentre 5945 User's Manual And Warranty

Copy
Normal Image produces output that matches the original.
•
• Mirror Image reverses the original image creating a mirror of the original.
8. Select the Negative Image option required.
• Positive Image produces output that matches the original.
• Negative Image converts the dark image areas in the original to light, and the light areas
to dark.
9. Select the OK button.
10. Enter the number of prints required using the numeric keypad on the control panel.
11. Press the Start button on the control panel to scan the original.
12. Remove the original from the document feeder or document glass when scanning has
completed. The job enters the job list ready for processing.
13. Press the Job Status button on the device control panel to view the job list and check the status
of the job.
14. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the Details button. Once the resources are available
the job will print.
More Information
Using a User ID to Log In at the Device
Viewing the Progress and Details of a Job using the Job Status Menu

Output Format

Making Copies into a Booklet

When you press the Start button to make a copy, the device scans your originals and temporarily
stores the images. It then prints the images based on the selections made.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the Copy features.
Use the Booklet Creation options to produce booklets from 1 or 2 sided originals. The device will
scan your originals and automatically reduce and arrange the images in the correct sequence on
your selected copy paper, so that a booklet is created when the copy set is folded in half. A cover
can be inserted onto the booklet automatically.
If your device is fitted with a Booklet Maker you can use the Booklet Creation feature to
automatically produce folded and stapled booklets.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
2. Press the Clear All button on the control panel to cancel any previous programming selections.
3. Press the Services Home button.
4. Select the Copy button on the touch screen. The copy features are displayed.
106
®
WorkCentre 5945/5955
User Guide