Brocade 6545 16 Gbps Fc Switch Module Specifications; Access Gateway Defaults; Processor And Memory Specifications; Weight And Physical Dimensions - Fujitsu Brocade 6545 Gen5 Hardware Reference Manual

Brocade 6545 16 Gbps FC Switch Module Specifications

Access Gateway defaults

Table 9
Gateway features.
TABLE 9
Feature
Automatic Failover
Automatic Failback
APC policy
Port group policy
ADS policy

Processor and memory specifications

The processor and memory installed in the Brocade 6545 16 Gbps FC Switch Module are shown in
Table
TABLE 10
Memory type
PowerPC 440EPX processor
SDRAM
Boot flash
Compact flash

Weight and physical dimensions

Table 11
TABLE 11
Dimension
Height
Width
Brocade 6545 Gen5 16-Gbps FC Switch Module Hardware Reference Manual
53-1003184-01
shows the default settings for the Brocade 6545 16 Gbps FC Switch Module Access
Brocade 6545 16 Gbps FC Switch Module Access Gateway defaults
10.
Brocade 6545 16 Gbps FC Switch Module memory specifications
lists the weight and physical dimensions of the Brocade 6545 16 Gbps FC Switch Module.
Brocade 6545 16 Gbps FC Switch Module specifications
Default setting
Enabled on all N_Ports
Enabled on all N_Ports
Disabled
Enabled
Disabled
Value
667 MHz
1 GB DDR2 - for system memory at 64 bits wide with
8 ECC bits at 166 MHz.
4 MB - used during system boot only and is field
upgradable with password protection.
1 GB - used for firmware downloading and logging.
Measurements
27.94 mm (1.1 in)
192.63 mm (7.584 in)
Appendix
A
47