Table of Contents
Advertisement
XG0440DC/XG0440DCR Hardware Guide
•
Safety and Installation Guide This manual describes the safety and installation of the XG0440.
•
XG0440DC/XG0440DCR Hardware Guide (with Licence Agreement)
• A RS232 Crossover (Null Modem) Cable is not included in the product package
Note
• USB memory is not included in the product package
1.1.2
Switch Port Side
The XG0440DC is used as an example.
The front and back direction of the rack mounting brackets attached to the side of the switch is reversed for the XG0440DC
and XG0440DCR.
MAC address
Label
Rack Mounting
Brackets
•
Rack Mounting Brackets
•
MAC address Label
•
Product Part Number, Serial Number Label
•
10/100/1000BASE-T Ports
•
SFP+ Slots
Reference See User's Guide "1.1 Hardware Specifications", p. 23, for technical details and qualified devices.
This manual describes the hardware of the XG0440.
10/100/1000BASE-T Ports
A metal fitting which attaches to the back side of the rack to fix the switch onto the rack.
This indicates the MAC addresses assigned to the switch.
The label is provided for easy access to product information for inventory purposes at
the port side of the switch.
10/100/1000BASE-T Ports. These ports for connecting to Ethernet (10/100/1000BASE-
T) Network Equipment.
Please use Category 5 LAN cable (if 1000BASE-T, use Category 5E or above) for
cabling.
Receptacles for SFP+ optical transceivers and Direct Attach copper (TWINAX) cable
assemblies.
Port numbers are assigned from the upper left to the lower right port receptacles.
18
Chapter 1 Getting Started
Product Part Number,
Serial Number Label
Dump Switch
SFP+ Slots
USB Port
Reset Switch
CONSOLE Port
Rack Mounting
Brackets
Items in the Package, Descriptions and Functions
Advertisement
Table of Contents
