Clear Statistics - Fujitsu XG2000 Series User Manual

XG2000 series User's Guide

5.16.19 clear statistics

Function
Clears all statistics stored since system startup.
The following statistics are cleared.
Traffic statistics: traffic-bytes, traffic-counts and framesize-traffic-counts
QoS traffic statistics: qos-priority-traffic-bytes and qos-priority-traffic-counts
VLAN traffic statistics: vlan-traffic-bytes and vlan-traffic-counts
Data flow statistics: dataflow
Error traffic statistics: error
Prompt
xg#
Command syntax
clear statistics
Command type
Operation management command
Note
If this command is issued during execution of the "monitor" command in "current" mode, the "monitor" command may
temporarily display incorrect statistics. If this occurs, reissue the "monitor" command. The "monitor" command will then
display the correct statistics.
Example
Clear all statistics stored since system startup.
xg# clear statistics
232/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009