System Log; System Log Settings - Fujitsu SH-E514TR1 10 User Manual

SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
Figure 7-6 Jumbo Frame
The fields that can be configured are described below:
From Port / To Port: Select the appropriate port range used for the configuration here.
Maximum Receive Frame Size: Enter the maximum receive frame size value here. This value must be between 64
and 9216 bytes. By default, this value is 9216 bytes.
Click Apply to accept the changes made.

System Log

System Log Settings

This window is used to view and configure the system's log settings. System logs record and manage events, as well
as report errors and informational messages.
Figure 7-7 System Log Settings
The fields that can be configured are described below:
Source Interface State: Enable or disable the source interface's global state.
Buffer Log State: Enable or disable the buffer log's global state here. Options to choose from are Enable, Disabled,
and Default. When selecting the Default option, the buffer log's global state will follow the default behavior.
Severity: Select the severity value of the type of information that will be logged. Options to choose from are 0
(Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and 7
(Debugging).
Discriminator Name: Enter the discriminator name used here. This name can be up to 15 characters long.
19