Command History List - D-Link DGS-3224TGR Command Line Interface Reference Manual

The switch port commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
?
show
command_history
dir
config
command_history
Each command is listed, in detail, in the following sections.
?
Used to display all commands in the Command Line Interface (CLI).
Purpose
Syntax ?
Description This command will display all of the commands available through the Command Line
Interface (CLI).
Parameters <command> – Enter the command that you want to see the full set of parameters for.
Restrictions None.
Usage Example:
To display all of the commands in the CLI:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
C
Parameters
<command>
<value>
OMMAND
173
28
H
ISTORY
L
IST