Show Link-Dependency - Dell Networking 2024 Reference Manual

Syntax
depends-on {gigabitethernet | port-channel | tengigabitethernet |
fortygigabitethernet}
no depends-on {gigabitethernet | port-channel | tengigabitethernet |
fortygigabitethernet}
intf-list — List of ports in unit/slot/port format or port-channel numbers.
•
Separate nonconsecutive items with a comma and no spaces. Use a hyphen
to designate the range of ports or port-channel numbers. (Range: Valid
Ethernet interface or port-channel list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
Circular dependencies are not allowed, i.e. interfaces added to the group may
not also appear in the depends-on list.
Examples
console(config-linkDep-group-1)#depends-on gigabitethernet 1/0/10
console(config-linkDep-group-1)#depends-on port-channel 6

show link-dependency

Use the show link-dependency command to show the link dependencies
configured for a particular group. If no group is specified, then all the
configured link-dependency groups are displayed.
Syntax
show link-dependency [
GroupID —Link dependency group identifier. (Range: Valid Group Id,
•
1–16)
• detail—Show detailed information about the state of members and the
dependent ports.
548
Link Dependency Commands
intf-list
intf-list
group GroupId
] [detail]