User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 mld snooping querier timer expiry 222
show ipv6 mld snooping querier
Use the show ipv6 mld snooping querier command to display MLD
Snooping Querier information. Configured information is displayed whether
or not MLD Snooping Querier is enabled.
Syntax
show ipv6 mld snooping querier [detail | vlan
vlan-id — A valid VLAN ID. (Range: 1 - 4093)
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
When the optional argument vlan vlan-id is not used, the command shows
the following information:
Parameter
MLD Snooping Querier
Mode
Querier Address
MLD Version
526
IPv6 MLD Snooping Querier Commands
Description
Indicates whether or not MLD Snooping Querier is
active on the switch.
Shows the IP Address which will be used in the IPv6
header while sending out MLD queries.
Indicates the version of MLD that will be used while
sending out the queries. This is defaulted to MLD v1
and it can not be changed.
vlan-id
]