Status Monitor Messages - Ricoh J001 Service Manual

4.1.2 STATUS MONITOR MESSAGES

NOTE: The exact wording of the messages (that show on the computer screen) in
the table below may change without prior notice.
Status
Normal
Printing
Drying
Preparing (Warming Up)
Overheated at Power On
(Recoverable)
Supplying Ink
Servicing Print Heads
Resetting Job
Power Off
Ink Supply Low (K)
SM
CÓPIA NÃO CONTROLADA
Status Display
Message Display
Ready.
You can print.
Ready.
Printing ...
Ready.
Please wait.
Time has been set to allow OHP transparency to dry.
Preparing and Adjusting...
Please wait.
Temperature is above the range allowed for printing.
Set up and use the printer in a location that meets
specifications for the allowed temperature and humidity.
Preparing and Adjusting...
Please wait.
Temperature is above the range allowed for printing.
Set up and use the printer in a location that meets
specifications for the allowed temperature and humidity.
Supplying ink ...
Please wait.
Cleaning or refreshing print heads ...
Please wait.
Ready.
Print job is resetting ...
Cannot send print job data.
Printer does not answer.
Make sure the printer is turned on. Check the power cable
connection.
Ready.
Black Print cartridge is empty. Open the cover and replace the
black Print cartridge.
Right, front cover: Black
If you intend to replace more than one cartridge, remove the
empty cartridges and replace them with new ones.
4-3
CÓPIA NÃO CONTROLADA
PRINTER DISPLAY SUMMARY
J001/J003