Ricoh J001 Service Manual page 111

Miscellaneous
Cause 1: The paper is not the correct paper for the print job.
Solution 1: Check the paper loaded for feeding. Make sure that it matches the type of
paper specified for the print job (transparency, ink jet, plain paper, etc.).
Make sure that the paper is approved for use with this printer. For more, see
the Operating Instructions or the "Specifications" in the last section of the
Service Manual.
Cause 2: The print mode selection was not correct.
Solution 2: Make sure that the print mode selection in the printer software application and
the printer driver is correct (Paper Type, Print Quality, Level Color, etc.) Make
sure that the "Color/Black and White" selection is correct.
Cause 3: Job settings in the software application are not correct.
Solution 3:
Check the settings for the print job in the software application. The settings in
the software application have priority over the printer driver settings.
Cause 4: Correct data not selected for the print job.
Solution 4: Confirm that the software application printed the correct data.
Cause 5: One or more of the nozzles is blocked.
Solution 5: Do cleaning Cycle 1 once. ( 4.5)
SM
CÓPIA NÃO CONTROLADA
4-15
CÓPIA NÃO CONTROLADA
GENERAL TROUBLESHOOTING
J001/J003